Pure flight fun: Since now on, it says: 'Let's get ready for Airrace "! The new Alpha 250 is a purebred FPV Race Quadrocopter, developed for flying with video glasses from the 'I' perspective. Experience model flies like a flight simulator on the PC. Equipped with FPV camera experience the flying experience as a simulator or in the real plane, the FPV racing with quadrocopters becomes always more and more popular. So 'racetrack layout' with gates, flags, or even pipes are created that must be flown through, or it is set a certain distance to trees with corridors. The chassis of the ALPHA 250 consists entirely of carbon fiber, which is extremely rigid and insensitive. The double bottom, which gives a streamlined look, even allows the installation of 4 Brushless ESC, and stowing over long cable. An ideal addition to this is the use of the gyro-receiver GR-18 or GR-24 PRO, which already contains a full Flight Control for attitude stabilization. Thus can be dispensed with an additional board together with additional cables. The 4 brushless controllers cables are simply plugged into the receiver and gyro will do the rest. About the telemetry menu of the HoTT transmitter then is possible to complete the setup of the gyro receiver. It is also possible to customize to your own needs the sensitivity of the flight control very easily via the telemetry receiver menus of the GR-18. For more information about the copter software for Gyro receiver can be found on our website. The Voltage Module allows for the timely warning of empty battery voltage, so that the model can be landed in time and safely. Because of the easy handling, the model is suited for all model pilots, even those coming out of the car or boat area and of course it is suitable for gamers. The quality model is fully assembled and adjusted and therefore very fast and easy to fly.
80-100 km/h with original equipment and 3S LiPo
Modular construction, so that in case of crash only single parts are required
Frame and arms in carbon-fibre
Carbon fibre of the highest quality construction with aluminium spacers
Highly accurate flight control
Integrated flight control into the receiver. Software made in Germany
Very direct and precise flight, eliminating additional transmission paths
All settings possible via HoTT transmitter
2300Kv brushless outrunner motors with windings carried by hand and special optimized multi-winding for cooling
Simplified access to FPV Racing attitude mode or FPV Racing professional rate mode
Simplified appearance, with double deck to install the controllers and cables
Voltage module with timely warning for a safe landing.
Tilt the motor to avoid turbulence of the rear propellers.
Self-tightening propeller adapters
Propellers stiffer with extremely high efficiency and flight characteristics optimized for FPV Racing
Universal construction to use the FPV camera with and without Action Cam
Smart design for optimum mounting of components
Dimensions Axles distance: 22x28 cm; Motors height: 6 cm; Frame height: 7 cm Frame: 5.6 x 22.5 x 5.5 cm (thickness 2 mm); Arms: 10x3 cm (thickness 3 mm) Weight without battery: 357g