The Ultra Power UP-D200 Smart Discharger Discharger is not a stand-alone unloader, but exclusively used as a widening accessory for the UP616 and UP6 + chargers in master-slave mode. Its discharge capacity is max. 200 W with a discharge current of up to 15 A. The discharge device is intended for LiPo / LiHV / LiFe / Li-Ion (1-6s) batteries, whereby the individual cell voltages are compensated by the balancer integrated in the charger (Master). By means of an internal heat sink in combination with the large fan, the waste heat generated during unloading is reliably removed from the unloading unit. The UP-D200 measures 128 x 98 x 95 mm, weighs 1,450 g and has a sturdy metal housing.