The remote-controlled aircraft Cirrus SR22 brushless 520mm 4-channel 3D/6G RTF is aimed at all model aircraft enthusiasts who are looking for a good-natured, powerful and visually appealing scale model. The efficient brushless drive in combination with the true-to-scale three-blade propeller ensures reliable performance, good climb values and an overall harmonious flight pattern. This makes the model suitable for both relaxed sightseeing flights and more dynamic maneuvers.

An integrated, highly effective gyro system stabilizes the aircraft during flight and largely compensates for wind influences. This makes control much easier and increases flight safety, especially for less experienced pilots. The 3-stage gyro system can be conveniently switched via the remote control, so that the flight behavior can be individually adapted to skill and flight conditions. In addition, automatic flight functions such as loops or inverted flight can be activated at the touch of a button, which enables spectacular maneuvers without much control effort.
The good position detection is supported by integrated scale LED lighting, which ensures a clear view even at greater distances or unfavorable lighting conditions. The model is delivered in Mode 2 and is immediately ready for use as an RTF version. At the same time, the receiver offers an S-Bus and DSM output with 3 to 5 volts, so that a separate remote control system from common manufacturers such as Futaba or Spektrum can be used if required.
Thanks to the true-to-scale landing gear, the Cirrus SR22 is ground-launching on flat ground, but can also be launched by hand without any problems. The robust main material is also forgiving of harder landings and contributes to a long service life. The highly visible, attractive paint underlines the scale character of the model and also improves orientation in the air. The replaceable battery allows short charging breaks and longer flying fun through the use of several batteries.

Highlights:
Efficient brushless drive with scale three-blade propeller for good flight performance
Highly effective gyro system installed, which keeps the model stable in the air and largely blocks
out wind influences S-Bus and DSM output on the receiver (3 – 5V) for your own remote control system (e.g. Futaba, Spektrum or similar)

Other features:
Scale LED lighting for good position detection
3-stage gyro, switchable on the remote control
Automatic looping can be
activated via remote control Automatic inverted flight can be
switched via the remote control Delivery in Mode 2
Scale landing gear, so that even ground launch on flat ground
Hand launch possible
without any problems Beautiful and clearly visible paint
Robust main material that can withstand
a harder landing

Technical data:
Wingspan: 520mm
Length: 390mm
Height: 120mm
Weight: 105g incl. battery
Main material: robust foam (EPP)
Thrust: approx. 1:1
Motor: Brushless Motor 1504
ESC: Brushless 10A
Servos: 3x Micro 3.7g Digital
Remote Control: 4 channel 2.4GHz 2410 – 2470MHz 13dBm
Range: approx. 150 – 200 meters
Battery: LiPo 1S 3.7V 1000mAh 25C Softcase Molex connector
Battery dimensions: 42x24x10mm
Battery weight: 22g
Flight time: up to 30 minutes possible (depending on flight style)
Charger: USB
Charging time: 60 – 90 minutes

Scope of delivery:
Model
Remote control
Battery
charging cable
Spare propeller
Adhesive for repairs
Spacer sleeves for spare propeller
Tool Instructions
DE/EN

Required accessories:

4x 1.5V Mignon AA batteries for remote control